German
French
Spanish
German
French
Spanish
Chamber volume: 800 l
Maximum working pressure: up to 10 bar
Cleaning efficiency: up to 70 m2/h
Maximum air flow: up to 1 500 l/min
Working area dimensions: 1 600 x 870 x 730 [mm]
IN THE PHOTO: BLASTING MACHINE LAND REKO® SCI-800-10 FA
All pictures shown are for illustrative purposes. Due to display techniques and conditions during photography, the actual appearance of the products, including their color, may differ from what is shown on the website.
| Chamber volume: | 800 liters |
| Supply voltage: | 400V~/ 50Hz |
| Working area dimensions: | 1600 x 870 x 730 mm |
| Maximum working pressure: | up to 10 bar |
| Cleaning efficiency: | up to 70 m2 / h |
| Cleaning level: | SA-2.0 (deep and extensive corrosion) |
| Air flow: | 500 l / min (for nozzle 4.0 mm) |
| Maximum air flow: | up to 1500 l / min |
| Nozzle diameters: | from 4 to 10 mm |
| Abrasive valve: | Vacuum-BRAGO |
| Pistol: | Automatic GA x8 |
| Viewfinder: | 305 x 610 [mm] |
| Work table load: | up to 250 kg |
| Lightning: | LED, adjustable in the range from +/- 90 degrees x2 |
| Chamber protection: | Powder coating |
| Working temperature: | 10 - 50 °C |
| Shared work table: | Yes |
| Inspection valve: | Yes |
| Weight: | 480 kg |
The offered abrasive blasting machine is a professional, safe and modern device from a Polish manufacturer. The sandblaster is equipped with a chute formed at a sharp angle to facilitate the sliding of the material and an inspection trigger enabling quick emptying of the abrasive chute. The use of innovative design solutions enables the processing of details weighing up to 250 kg in a chamber with working dimensions of 1 600 x 870 x 730 mm at a pressure of up to 10 bar. The high-quality vacuum abrasive valve of the German brand BRAGO is characterized by above-average mechanical strength and abrasion resistance compared to standard valves installed in blasting machines of competing companies. An important advantage of using BRAGO valves and automatic CTR vacuum guns with a boron carbide nozzle and shot blasting tubes carrying the material in our devices is the ability to dose any type of abrasive material - both quartz sand and glass microspheres, ceramic flours and granulates, corundum, electrocorundum, shot, soda etc.
The standardized claw connector mounted in the device protects against accidental disconnection of the compressed air supply line, while enabling its quick and safe replacement, regardless of its diameter. The comfort and safety of work is ensured by the use of precise LED lighting with the possibility of changing the illumination angle in the range of +/- 90 degrees and a 3-element set of the visor with replaceable protective foils with dimensions of 305×610 mm.
In order to meet the growing safety requirements, all blasting chambers of the SCI series have been equipped with an automatic safety switch that interrupts the operation of the device when the chamber lid is lifted.
Depending on the requirements, the chambers of the SCI series can be equipped with four types of dedicated separation and dedusting systems with different efficiency of cleaning the working chamber. The device works in a closed circuit ensuring up to 100% recovery of material and eliminates dust formation outside the chamber.
The automatic sandblasting system SCI-800-10 FA is designed to cover the largest possible area with abrasive jet in one go. The device was equipped with roller conveyor with manual drive (length of each segment: 1.5 Lm) with the possibility of connection and dismantling. Maximum cross-section of the processed detail is 230×400 mm (without length restrictions). The automatic sandblasting system SCI-800-10 FA enables cleaning of the processed detail from all sides at the same time and movements to the left/right.
The working system was divided into sections with independent regulation of intensity and input of blasting media and aggressiveness of processing and with the possibility of choosing active/passive nozzles. The detail is cleaned by additional integrated blower system. The number, type and position of the working nozzles, the width of the transport rollers and the length of the input are adjusted to the customer's ability.
The operation of the sandblasting system is controlled using the system control located on the front of the device. The sight glass placed in the body of the device allows observation of the results of the introduced changes in the processing process. The sandblasting machine is intended for high-demanding customers for whom volume, speed of cleaning and limitation of the number of personnel for the processing process are most important.
The device is designed for the most demanding users - both in workshops and in industry. The cleaner has aCE declaration of conformity and an extensive user manual. The offer includes the possibility to buy a variety of optional equipment with a compressor and compressed air treatment systems.
TAGS: blasting chamber | sandblaster | blasting chambers | blasting machine Vienna | sandblasters | mobile sandblasters | Manufacturer of Pressure Vessels and Blasting Machines Land Reko®
